--->Thermal powers

20 Items

  • Waste Rubber-Polyethylene Composite Materials for Enhancement of Mechanical, Thermal, and Electrical Properties–A Critical Review

    Hashim S. Hammood, Najeeb S. Abtan, Saad R. Ahmed

    1-20

    DOI: https://doi.org/10.25130/tjes.32.4.21

  • Theoretical and Experimental Investigation of Forced Convection of Airflow Over Longitudinally Finned Flat Tube Bank Heat Exchanger

    Ahmed H. Ahmed, Maki H. Zaidan, Manar S.M. Al-Jethelah

    1-12

    DOI: https://doi.org/10.25130/tjes.32.3.7

  • The Thermophysical Properties of Various Types of Evaporative Cooling Pads Materials

    Zeyad Khalaf Hamad, Thamer Khalif Salem, Manar S.M. Al-Jethelah

    1-10

    DOI: https://doi.org/10.25130/tjes.33.1.7

  • The Impact of Receiver Geometry with Nanofluid on the Performance of a Fresnel Collector

    Manar S. M. Al-Jethelah, Hussam S. Dheyab, Samer M. Khalaf, Khairul Habib, Kamaruzzaman Bin Sopian

    1-11

    DOI: https://doi.org/10.25130/tjes.32.1.19

  • The Effect of Uneven Metal Foam Distribution on Solar Compound Parabolic Trough Collector Receiver Thermal Performance

    Israa S. Farhan, Akeel A. Mohammed, Manar S. M. Al-Jethelah

    291-305

    DOI: https://doi.org/10.25130/tjes.31.1.24

  • Study the Thermal Performance of a PCM Layer-Filled Triple Glazed Window under Iraqi Climate Conditions

    Mina A. Nsaif, Jalal M. Jalil, Mounir Baccar

    246-257

    DOI: https://doi.org/10.25130/tjes.31.3.23

  • Performance Evaluation of a Forced Draft Cooling Tower Using Cellulosic Honeycomb and Polyvinyl Chloride Fillings

    Abdulrahman M. Homadi, Mohammed Gh. Jehad, Obaid T. Fadhil

    1-11

    DOI: https://doi.org/10.25130/tjes.32.3.28

  • Morphological, Physical, and Thermal Properties of Fly Ash Reinforced Low- and High-Density Polyethylene Composites: A Comprehensive Review

    Saif S. Irhayyim, Farouk M. Mahdi, Saad R. Ahmed, Sanjeev Khanna

    1-29

    DOI: https://doi.org/10.25130/tjes.32.3.20

  • Integrated Assessment and Geoinformation Modeling of Geothermal Energy Potential for Sustainable Heat Supply in Turkmenistan

    Bekimbetova Gulbahar Risbayevn, Rakhmonberdieva Nodira Bilolovna, Yudaev Igor Viktorovich, Ivanov Oleg Valerievich, Gracheva Natalia Nikolaevna, Psyukalo Sergey Petrovich
    DOI: https://doi.org/10.25130/0/tjes.sp1.2025.9

  • Influence of Stress Cycles under the Fatigue Endurance Limit on Strength and Life of Aluminum Nanocomposite

    Aseel A. Alhamdany, Thaer Abdulwahhab Shihab, Adil Abed Nayeeif, Hussain Jasim Alalkawi

    1-9

    DOI: https://doi.org/10.25130/tjes.32.2.10

  • Improving the Performance of a Home Solar Water Heater System Using Porous Materials and Reflectors

    Hind F. Saleh, Muhammad Asmail Eleiwi, Nassir D. Mokhlif

    244-254

    DOI: https://doi.org/10.25130/tjes.31.2.23

  • Experimental Evaluation of Binary and Combined Cycle Geothermal Power Plants Operating with Optimised Working Fluids

    E.P. Khaleeva, N.A. Ashurov, B. Uzokov, Yu.V. Daus, M.S. Demchenko, S.V. Sargsyan

    1-8

    DOI: https://doi.org/10.25130/tjes.sp1.2025.26

  • Energy and Exergy Analyses of a Combined Power Plant Based on Natural Gas Combustion

    Khalaf Ibrahim Hamada, Marwah N Mohammed, Raad R. Jasim , Thamir K. Ibrahim

    17-26

    DOI: https://doi.org/10.25130/tjes.30.3.3

  • Effect of Phase Change Material Heated by Solar Energy on the Flow Assurance of Heavy Crude Oil

    Ghassan Al-Doori, Osama H. Al Naamani, Girma T. Chala

    1-12

    DOI: https://doi.org/10.25130/tjes.32.2.18

  • Effect of Different Compressor Speeds on the Energy and Exergy of an Automobile Air-Conditioner Using R134a in the Absence and Presence of a Liquid-Suction Heat Exchanger

    Ansam A. M. Alani, Wail S. Sarsam

    1-15

    DOI: https://doi.org/10.25130/tjes.32.1.13

  • Design of an Axisymmetric Triangular Heatsink with Radial Arrangement: An Experimental Investigation of Natural Convection Heat Transfer

    Jamal Bakr Khaleel, Merdin Danışmaz, Tahseen Ahmad Tahseen, Mohammed I. A. Tahseen, Thamer Khalif Salem

    92-101

    DOI: https://doi.org/10.25130/tjes.31.4.9

  • Closed Solar Air Heater System Integrated with PCM (RT42 and RT50) in a Thermal Storage-Finned Heat Exchanger Unit

    Hussam S. Dheyab, Manar Al-Jethelah, Thamir K. Ibrahim, Sirine Chtourou, Mounir Baccar

    27-37

    DOI: https://doi.org/10.25130/tjes.30.3.4

  • Assessment of Perforated Double-Pass Solar Air Heater Using Parametric Interaction Analysis for Performance Enhancement in Solar Thermal Systems

    Ali A. Gitan, Abdulbari Mohammed

    177-191

    DOI: https://doi.org/10.25130/tjes.31.3.17

  • An Experimental and Numerical Investigation of the Effect of Different Wall Types on the Iraqi Building's Thermal Load

    Atif Ali Hasan, Mahmood H. Khaleel , Kadhum Audaa Jehhef

    223-235

    DOI: https://doi.org/10.25130/tjes.31.1.19

  • A Theoretical Study to Incorporate Capillary Tubes Action and Evaporation Process as Green Energy Techniques for Water Lifting

    Tawfeeq W. Mohammed, Marwah N. Mohammed, Muhammad A. Eleiwi, Thamir K. Ibrahim

    159-166

    DOI: https://doi.org/10.25130/tjes.30.4.17