Hydrological and Geometric Analysis of a Proposed Reservoir on the Upper Zab River Using GIS and Remote Sensing Techniques

1-12

Investigation of Corrosion Resistance and Surface Properties of Carbon Steel Treated with Phosphate Coating in Aqueous Media

1-10

Design and Evaluation of Asphalt Mixtures Containing Crumb Rubber as Aggregates Replacement

1-12

Thermal Performance of Hybrid Solar Swimming Pool and Heating of Building in Kirkuk City-Iraq

1-12

Optimum Design of RC Beams Strengthened with Externally Bonded FRP Using Pattern Search

1-14

A Comparison of Tensile and Flexural Properties of Jute Mat Epoxy-Based Composites Treated with Different Alkaline Solutions

1-9

Using a Curved Bed Sill as a Scour Countermeasure around a Complex Bridge Pier

1-10

Friction Stir Spot Welding between Copper and AA6061-T6 with the Aid of Interlayer: An Experimental Study

1-13

Evaluation of the Pile Group Response for Machine Foundation under Cyclic Load in Sandy Soil

1-9

Air Pollution Dispersion Modeling from Point Sources Using Gaussian Plume Model: A Case Study of Kirkuk, Iraq

1-15

Studying Heat-Affected Zone, Surface Roughness and Material Removal Rate in NPMEDM Process for Inconel 718 Using Nano Silicon Carbide Powder

1-13

Evaluating the Predicted Shear Strength of Concrete Deep Beams Reinforced with FRP Bars with/without Fibrous Concrete

1-13

Effect of Different Compressor Speeds on the Energy and Exergy of an Automobile Air-Conditioner Using R134a in the Absence and Presence of a Liquid-Suction Heat Exchanger

1-15

Geotechnical Study of Expansive Soil Treated with Nano-Calcium Carbonate Materials in Al-Faw City, Southern Iraq

1-8

Assessing Performance of Alkali Activated Calcined Kaolin Clay Based Self-Compacting Geopolymer Concrete Using Nanoparticles and Micro Steel Fiber

1-10

Impact of Integrating Nanoparticles with Hydrocarbon Solvent on Enhanced Heavy Oil Recovery

1-9

Optimal Coordination of Directional Overcurrent Relays (DOCR) Using Cheetah Optimizer

1-16

Preparation of Electrode Materials from Iron Cobalt Oxide on Carbon Fiber Cloth used for Asymmetric Supercapacitors

1-9

The Impact of Receiver Geometry with Nanofluid on the Performance of a Fresnel Collector

1-11

Employing the Beamforming Technique to Enhance the Medical Ambulance Performance, IoMT

1-9

The Torsional Behavior of Transversely Opened Reinforced Concrete Beams Strengthened by Steel Pipe

1-14

Oily Wastewater Treatment by Forward Osmosis and Nanofiltration Membranes

1-13

Iraqi Drinking Water Quality Standards (IQS 417/ 2009) – Revisited

1-7

Study and Analysis for High Performance of Hybridization Floating Solar Panels Technique with Hydropower

1-8

Optimization of Batch Extraction of Aromatics from Reformed Heavy Naphtha by Response Surface Methodology

1-9

Effect of Core Angle in Earth Dam on Seepage Characteristic (Numerical Model)

1-10

Preparation and Characterization of MgO/Fe3O4 Activated Carbon with Statistically Optimization for Oil Uptake from Emulsion

1-13

Numerical Investigation of the Embankment Dam Safety during Rapid Drawdown Conditions Using Horizontal Drains

1-18

An Experimental Study of the Core Location and Shape Effect on Seepage and Stability of Zoned Earth Fill Dam

1-12

Reaction Kinetics and Mass Transfer of Photocatalytic Fenton for Phenol Degradation in a Petroleum Refinery Wastewater

1-11

Fatigue Life Prediction for an Extrusion Die Based on the Experimental Factors

1-15

Empirical Investigation Study of Impeller Wind Turbine

Performance Enhancement of Phase Change Material PCM Thermal Energy Storage TES System Using Nanoparticles Additives: An Experimental Investigation

1-16

Performance Evaluation of the Circular Patch Antenna and Size Reduction with Slotted for WLAN Application

1-9

Impact of CO2 Flow Rate and Nutrient Augmentation on the Production of Bioelectricity in a Photosynthetic Microbial Carbon Capture Cell

1-10